| PART |
Description |
Maker |
| MC145040DW1 MC145040DW2 MC145040FN1 MC145040FN2 MC |
Full Featured -48V Hot Swap Power Manager, Industrial Temp. 44-TSSOP -40 to 85
8-Bit A/D Converters With Serial Interface
|
Motorola, Inc.
|
| MCP18480 |
The MCP18480 is a –48V Hot Swap Controller with fully configurable features. This Hot Swap Controller have OVLO, UVLO protection features on top of Foldback Current Limiting and Circuit Breaker features. Although ideally suited optic
-48V Hot Swap Controller
|
MICROCHIP[Microchip Technology]
|
| SMH4804 |
-48V Programmable Hot Swap Sequencing Power Controller
|
SUMMIT[Summit Microelectronics, Inc.]
|
| ADM1075-1ACPZ |
Hot Swap Voltage Controllers IC -48V Cntlr & Pwr Monitor
|
Analog Devices, Inc.
|
| EVAL-ADM1073MEB ADM1073 ADM1073ARU ADM1073ARU-REEL |
-48 V Full Feature Hot Swap Controller
Full-Feature −48 V Hot Swap Controller
|
AD[Analog Devices]
|
| MAX5938 |
-48V Hot-Swap Controller with VIN Step Immunity,No RSENSE, and Overvoltage Protection
From old datasheet system
|
Maxim
|
| LX5204 LX5204CDP LX5204CPWP |
SCSI - Single Ended
9-LINE HOT SWAP/ POWER SCSI TERMINATOR
9-LINE HOT SWAP, POWER SCSI TERMINATOR
9-LINE HOT SWAP, レPOWER SCSI TERMINATOR
9-LINE HOT SWAP, μPOWER SCSI TERMINATOR
|
MICROSEMI[Microsemi Corporation]
|
| MAX807NCUE MAX807NEWE MAX807LMJE MAX807LCWE-T |
DC to 1000 MHz IF Gain Block; Package: LFCSP (2x3x.85mm); No of Pins: 8; Temperature Range: Industrial
Full-Featured µP Supervisory Circuit with ±1.5% Reset Accuracy 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO16
Full-Featured uP Supervisory Circuit with /-1.5% Reset Accuracy
|
MAXIM INTEGRATED PRODUCTS INC
Maxim Integrated Products, Inc.
http://
|
| X24042 X24042P X24042P-2.7 X24042P-3 X24042PI X240 |
4K (512 x 8bit) serial E2PROM
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active High
|
XICOR[Xicor Inc.]
|
| X24165 X24165P X24165P-2.7 X24165PI X24165PI-2.7 X |
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active Low
Hot Swap Controller IC; Hot Swap Controller Type:Negative Voltage; Controlled Voltage Min:-10V; Controlled Voltage Max:-80V; Number of Controlled Voltages:1; Package/Case:8-SOIC; Power Good Output:Active High
IC LDO REG 3A 5.5V W/ENBL 8-SOIC
Advanced 2-Wire Serial E2PROM with Block Lock Protection
|
XICOR[Xicor Inc.]
|
